Metallic Gaskets

Request a Quote

Mercer manufactures metal and metal jacketed gaskets for heat exchangers, compressors, condensers, pumps, valves, and turbines. We provide all metals for jacketed, double jacketed, corrugated, wire, solid, profile, shims and spiral wound gaskets.

Jacketed: A gasket of one material is jacketed with a metal layer. The jacket can partially or completely cover the filler. See our Materials Guide for more information on metals and fillers.

---

Solid Metal Gaskets

Solid metal gaskets are used in applications where temperatures and pressures rule out the use of traditional gasket materials. In general, gasket compression loads need to be high to deform the gasket, and the metal used for the gasket should be softer than the metal in the mating surfaces.

 

	350 Flat Solid: Cut from sheet metal, these gaskets can be of unlimited size and shape. mating surfaces need to be perfectly aligned and flat for metal gaskets to provide good seals.
	360 Profiled and Serrated: A solid gasket with surface grooves facilitating a good seal with lower seating stresses. These styles can be jacketed to protect the flange surfaces.
	315 Corrugated: Made from thin metal, these gaskets provide a seal at low seating stress. They may be surface-treated with ceramic, non-asbestos or flexible graphite, or they may be used with a Teflon® envelope.

---

Specialty Metal Gaskets & Shims

SpiralWound Gaskets: For high temperature, high pressure applications with a low seating stress. Mercer carries a large inventory of spiral wound gaskets in stainless steel with Grafoil, Non-asbestos, or Teflon®. We also provide all custom sizes and materials.

ElastaGraph: A corrugated gasket made of seamless flexible graphite over a metallic core. A high density inner ring increases sealability. For high temperature, high pressure applications with low minimum seating stress.

Heavy Cross-Section: Proprietary high-pressure sealing systems have mating surfaces into which fit rings of a specific cross-section (API ring joint-oval, octagonal, BX, RX; delta; lens; Bridgeman; round; etc.)

Seal Strips: For use in heat exchangers, boilers and condensers, these parts are made of multiple layers of metal which are tack welded together.

Shims: For use as spacers, we cut these parts in all shapes, sizes and metals.

 

Mercer Gasket & Shim
Interstate Industrial Park & 110 Benigno Boulevard
Bellmawr, NJ 08031
ISO 9001:2000 certified

On call 24 hours!
(800) 210-5000
Fax: (856) 931-6400